BATTERY CHARGER UNIT - RECTIFIER
My Cart
FLT-3P-220V100A - BATTERY CHARGER UNIT - RECTIFIER
WHAT IS BATTERY CHARGER UNIT - RECTIFIER?
FLAT Battery Chargers are produced with microprocessor based boards and have modular structure with its electronical board design. Control and adjustment is realized with thyristor, diode bridges. System has protection system against over current, over voltage, over temperature, short circuit and peak current.
In Flat serial Battery Chargers & Rectifiers an inductor capacitor filter exists at the output. Input and output terminals are in cabinet and protected by suitable fuses.
WHAT IS BATTERY CHARGER UNIT - RECTIFIER?
FLAT Battery Chargers are produced with microprocessor based boards and have modular structure with its electronical board design. Control and adjustment is realized with thyristor, diode bridges. System has protection system against over current, over voltage, over temperature, short circuit and peak current.
In Flat serial Battery Chargers & Rectifiers an inductor capacitor filter exists at the output. Input and output terminals are in cabinet and protected by suitable fuses.
WHAT ARE THE APPLICATION FIELDS?
FLAT Serial Battery Chargers are designed and produced to be used in communication and alarm circuit of ships and yachts, safety systems in business place and residences, petrochemical industry and power electronics applications, training and test laboratories of schools, test laboratories of factories or feeding system of electronic devices. They are also used for DC feeding system and charge of lead acid, nickel cadmium and dry type batteries. In high discharge currents it provides opportunity to turn on and turn off in short periods. It provides appropriate solutions in emergency illuminating, alarm communication circuits, galvanization and in emergency aluminums eloxal facilities, petro chemistry industry and power electronic practices.
- Production with single phase and three phase input supply
- Production between range of 12-450 V DC and 1 A-1000 A
- Automatic float boost facility
- High productivity through Thyristor-Diode, Transistor technology and microprocessor controlled boards
- Low waviness (ripple 1%), high current and voltage stability
- User friendly, easy and comprehensible LCD display and mimic diagram
- Audial and lightened warning for all faults and dry contact outputs
- External battery connection
- Battery discharge protection with Low Voltage Disconnect unit (LVD)
- Silicon Dropper unit for voltage regulation of DC supply
- Minimal size, static structure, easy commissioning
- Cabinet design suitable for industrial environment
- Special, durable cabinet, powder coated with standard color named RAL-7035, IP21 (IP54 Optional)
- Manuel adjusting property for output voltage and output current from LCD
- Automatic battery activation in case of power cuts (Optional)
- Possibility of regulation of charge-voltage-current through battery temperature feedback (Optional)
- Production with ISO 9001:2008 Quality Management System
| MODEL |
|
||||||||||||||||||||
| POWER (kVA) | |||||||||||||||||||||
| Power Factor | 0,8 (optional 0,9) | ||||||||||||||||||||
| INPUT |
|
||||||||||||||||||||
| Voltage | 380 V AC Three Phase + Neutral | ||||||||||||||||||||
| Voltage Tolerance | ± %15 | ||||||||||||||||||||
| Frequency | 50Hz ± %5 | ||||||||||||||||||||
| Protection | Suitable circuit breaker | ||||||||||||||||||||
| OUTPUT |
|
||||||||||||||||||||
| Nominal Output Voltage | 220 V DC | ||||||||||||||||||||
| Output Voltage Adjustment | -+ % 20 | ||||||||||||||||||||
| Nominal Output Current | 150 A | ||||||||||||||||||||
| Current Limit Adjustment | 5A - 150A | ||||||||||||||||||||
| Battery Charging System | Automatic constant current / constant voltage control with microprocessor based boards Programmable automatic and manuel BOOST charge - FLOAT Charge control |
||||||||||||||||||||
| Battery Type | Nickel-Cadmium (Ni-Cd), Lead Acid, Dry Type | ||||||||||||||||||||
| PROTECTION |
|
||||||||||||||||||||
| Silicon Dropper | Output voltage regulation and restriction for battery charger and power supply circuits applications with “Silicon Dropper” | ||||||||||||||||||||
| LVD Unit | Automatic low voltage disconnect units to protect the batteries from deep discharge, (optional) | ||||||||||||||||||||
| RPDD Unit | Reverse polarity protection | ||||||||||||||||||||
| Automation Unit | Dry contacts for all kind of warnings (optional) | ||||||||||||||||||||
| Efficiency | 0,9 | ||||||||||||||||||||
| Crest Factor | 3:1 | ||||||||||||||||||||
| Over Load | 0% - 100% load operates continuously, 115% load electronic current limiting | ||||||||||||||||||||
| Protection | electronic warning and protection for; high output voltage, low output voltage over temperature and over load, thyristor failure, earth leakage,...etc. | ||||||||||||||||||||
| Communication | Dry contact output for all fault and status information | ||||||||||||||||||||
| LCD Display | Input voltage, output voltage, output current, battery current, boost charge time and set values for LVD can be seen on LCD display. Additionally; written warnings for over current, over temperature, input failure and general failure (failure record optionally) |
||||||||||||||||||||
| Connection | Suitable terminals for input, output, battery and ale art contact | ||||||||||||||||||||
| ENVIRONMENTAL CONDITIONS |
|
||||||||||||||||||||
| Operating Temperature | -10 °C ~ +40 °C (optional cooling units on request) | ||||||||||||||||||||
| Altitude | < 3000 m | ||||||||||||||||||||
| Humidity | % 90 none condensed | ||||||||||||||||||||
| Acoustic Noise | < 50 dB | ||||||||||||||||||||
| CABIN SPECIFICATIONS |
|
||||||||||||||||||||
| Dimensions (WxDxH) cm | 70x70x140 | ||||||||||||||||||||
| Weight (kg) | 380 | ||||||||||||||||||||
| OPTION | CODE | DESCRIPTION |
| Non-standard input voltage value | xxxV | FLT series battery chargers can be produced at any required input voltage value that must be stated clearly by the order confirmation. |
| Non-standard input voltage range | XS,M,L,XL | FLT series battery chargers can be produced at different input voltage ranges. The required ranges levels must be stated clearly by the order confirmation. Maximum input voltage range: -60%, +40% |
| Non-standard output voltage value | xxxV | FLT series battery chargers can be produced at any required output voltage value that must be stated clearly by the order confirmation. |
| Non-standard output voltage tolerance | R | Output voltage tolerances of battery chargers can be +/-1%, +/-2%, -3%, +/-5%. |
| Adjustable output voltage | ADJ | Output voltage of FLT series battery chargers can be adjusted by the LCD panel. Maximum adjusting range is +/-15% |
| Non-standard frequency | FRQ | FLT series battery chargers are produced to function under 60 Hz network frequency. |
| Output protection CB | OCB | Optional CB may be added to the battery charger output to provide additional protection. |
| Special Enclosure | K | FLT series battery chargers can be produced both INDOOR and OUTDOOR in special cabinets having different IPXX protection classes. |
| Input/Output EMC Filter | EMC | Specially designed EMC-Filters can be added optionally to the both input and output of FLT series battery chargers. Filter specifications must be stated by offer/order. |
| Input/Output Surge protector | ESD | High-Voltage Protection and Surge Arrester can be added to the both input and output of FLT series battery chargers. The required protection classes and the specifications (CLASS-I,CLASS-II,CLASS-III) must be given with the order |
| Dry contacts | C | NO-NC dry contactor sockets can be applied for ON-OFF and Automatic Bypass modes of the battery charges. |
| Non-standard Input/Output terminal | T | According to the various customer needs. Input and output terminals can be designed and located specially on the cabinet. The required terminal drawings must be supplied together with the offer/order. |
| Special design and accessories | SPM | FLT series battery chargers can be designed specially with respect to direct customer needs and technical specifications. All special requirements and detailed technical drawings and specifications for accessories must be provided by the customer at the offer/order stage. |
| LDV Unit | LVD | Low voltage disconnect for Battery discharge protection. |
| SDU Unit | SDU | Silicon dropper unit for voltage regulation of DC supply. |
| Input VM/AM | VM/AM | Analog / digital voltmeter or ammeter for input. |
| Output VM/AM | VM/AM | Analog / digital voltmeter or ammeter for output. |
| Battery VM/AM | VM/AM | Analog / digital voltmeter or ammeter for the batteries. |
| Output Distribution CB | CB | Desired number of distribution CB for output can be applied. |
| Battery Rack | BR | Battery racks can be installed if required in the order. |